Steel
Tubes
Chilled iron
shot and grit
Iron
Casting

Chilled iron shot and grit

 Chilled iron shot and grit JSC "MMW" produces technical chilled iron shot and grit according to the State Standard 11964-8. We can also produce chilled iron grit with special sowing.

Chilled iron shot and grit are used for:

  • shot casting and shot-blasting cleaning of casting, forged pieces and other products before and after thermal treatment;

  • surface preparation of details under galvanized cover, enameling, cleaning of cutting instrument, thin-walled rolling from carbonaceous, low-carbon and alloyed steel;

  • scrubbing of small-sized foundry goods in engineering industry by the increased requirements to roughness of large and middle nonferrous castings;
  • scrubbing of iron and steel middle, heavy and especially heavy casting for diesel engine building, hydraulic turbines, blowing machines, turbo generators, fabrication mill, cylinder blocks of automobile and tractor motor;
  • reinforcement of torsion shafts, spring plates, cylindrical twisted springs, details of complex geometrical molding boxes.

Chilled iron shot (CIS) is produced according to such fractions: 0,5; 0,8; 1,0; 1,4; 1,8; 2,2; 2,8; 3,2; 3,6; 5,0; 6,0. Ballast chilled iron shot (5,0; 6,0) is done in accordance with Technical Conditions TY BY 700123720.010-2008 and is used for filling up capacities of electric locomotives and diesel locomotives, as an abrasive in scrubbing tubes of steam and hot water boilers. Chilled iron grit (CIG) is fabricated according to following fractions: 0,3; 0,5; 0,8; 1,0; 1,4; 1,8; 2,2; G05, G07, G12, G17, G24, G34, G39, G47, G55, G66, G80.

 Compliance of physical-mechanical properties of shot to the attributes

Shot type Shot number Density, kg/m3, not less Hardness, Hv
CIS 0,5-3,6 7200 545…830
CIS 0,3-2,2

Shot is packed in bags “Big-Bag” (capacity 1000 kg) and in propylene bags (capacity 25 kg) in 40 pcs on wooden Euro pallets under thermocontractable film.

 Óïàêîâêà äðîáè  Óïàêîâêà äðîáè

 

The inspection of child iron grit dimensions during sowing on the control sieve collection:

sign The dimensions of the sieve sign, mm Acceptable rests on the sieve (%) sign The dimensions of the sieve sign, mm Acceptable rests on the sieve (%)
no less than no much than no less than no much than

G 01

 0,125
0,045		 -
20		 5
-

G 34

 1,180
0,710
0,425		 -
70
80		 5
-
-

G 02

 0,180
0,075
0,045		 -
55
65		 5
-
-

G 39

 1,400
1,000
0,710		 -
75
85		 5
-
-

G 05

 0,300
0,125
0,075		 -
60
70		 5
-
-

G 47

 1,700
1,180
1,000		 -
75
85		 5
-
-

G 07

 0,425
0,180
0,125		 -
65
75		 5
-
-

G 55

 2,000
1,400
1,180		 -
80
90		 5
-
-

G 12

 0,710
0,300
0,180		 -
65
75		 5
-
-

G 66

 2,360
1,700
1,400		 -
80
90		 5
-
-

G 17

 0,850
0,425
0,180		 -
70
85		 5
-
-

G 80

 2,800
2,000
1,700		 -
80
90		 5
-
-

G 24

 1,000
0,630
0,355		 -
70
85		 5
-
-

 

     

Sale of iron shot and grit produced by JSC “Mogilev Metallurgical Works” on the territory of Russian Federation is realized by our official dealer companies:

“TIC Promtechmash” Ltd., Yarcevo city, acting according to Dealer Contract ¹97/P from 15/02/11.

Contact  information:     

  e-mail: promtehmash@mail.ru   

   +7 910 11 33 703    

  +375 29 650 52 67   

   Contact person: Halina Rikunova

“Trading Company AM” Ltd., Moscow city, acting according to Dealer Contract ¹ 1/250-10 from 22/12/10   

   Contact information:    

  e-mail: is@admsteel.ru   

   +7 985 77 63 307      

   +7 495 221 40 94      

  Contact person: Alexander Zanis

 

Site creation: - ArtisMedia
Address: Belarus, 212030, Mogilev, Kurako Str, 28    Tel./Fax: +375 222 469009    E-mail: metall@mogilev.by
© JSC "Mogilev Metallurgical Works" , 2011